Modell: OCL-500
Main Technical Data of Engine | ||||
Brand | 400kw/500kva water-cooled 6 cylinder diesel generator power plant with brushless ac generator head | |||
Model | KTA19-G4 | |||
Prime Power | 500KVA/400KW | |||
Governor Type | Electronic | |||
Cylinder Type | 6 cylinder in line,direct injection | |||
Cooling Method | Water cooled | |||
Bore × Stroke | 159*159 mm | |||
Compression Ratio | 13.9:1 | |||
Displacement | 18.9L | |||
Starting Method | DC 24V | |||
Fuel Consumption | ≤203g/kw.h | |||
Main Technical Data of Alternator | ||||
Brand | Stamford | |||
Model | HCI 544C | |||
Prime Power | 500KVA/400KW | |||
Excitation Mode | Brushless, self-exciting ,single bearing | |||
Prime Voltage | 220/380V,230/400V | |||
Frequency | 50HZ | |||
Power Factor | 0.8(lagging) | |||
Phase/Wire | 3 phase 4 wires | |||
Insulation Grade | H | |||
Protection Class | IP23 | |||
Intelligent control system | ||||
Brand:Smartgen 6110/ Smartgen 6120with ATS( Automatic Transfer switches ) | ||||
Function:Over load protection; Generator over/under frequency protection:Generator over/under/unbalance voltage Protection Over load protection; Generator over/under frequency protection:Generator over/under/unbalance voltage Protection ,etc. | ||||
ATS(Automatic Transfer switches):optional | ||||
Function:Once the main power failure, the control panel will received the signal to start the genset within 5 seconds, ATS will switch to the load wires to connect genset power supply,and the whole process takes less than 15 seconds. After the main power recovered 30 seconds, ATS automatically switch the load wires to connect main power supply,the genset will stop after running 180 seconds. |
Produktgruppe : Dieselgenerator mit berühmtem Motor